Connect the usb cable from host pc to USB_UART port on the board.
Open AmpServer and go to File\Options.
Open MCP RS232 and select the COM-Port and set the speed to Baud rate configured in your application (256000 by default).
Save the configuration from clicking ‘OK’.
Select the protocol as MCP RS232 and click the check box to connect.
Open GTT and create a platform and device for ADSP-SC573.
Set the device ID to the device ID configured in your application (0x03 by default).
Platform ID may be needed to set as same as device ID.
Schematic can be created and loaded from GTT after the above configuration.
Once the schematic is send to the board, the application need to be reloaded to load the new schematic.