The NonlinearClip audio object is used to add a clip-on continuous input signal every time the signal level exceeds the clip threshold value. If Input signal value is exceeded clip threshold the output value is set to Clip threshold value.
Features of NonlinearClip audio object.
- NonlinearClip AO is supported for all framework configurable sample rates and block lengths.
- NonlinearClip AO is supported for both Win64 and GUL platforms.
Use Cases: This object can be deployed whenever a Nonlinear Clip is required in the audio pipeline.
NonlinearClip Properties
Below table describes about the NonlinearClip audio object properties and functionality.
| Properties | Description |
| # of Audio In | Enter the number of audio input. The number of audio outputs is the same than the audio inputs.
|
| Display Name | Display name of the NonlinearClip audio object in signal flow design. It can be changed based on the intended usage of the object. |
Mode
The NonlinearClip audio object doesn’t have any mode.
Additional Parameters
The NonlinearClip audio object doesn’t have any additional parameters.
Tuning Parameters
| Parameter | Description | Default | Range | Units |
| ClipThreshold | Clip threshold value to where clip is applied. | 0.0 | -120 to 6.0 | dB |
Control Parameters
The NonlinearClip audio object don’t support control parameters.
Native Panel
NonlinearClip audio object does not support native panel.