Delay Based Effector native panel is to configure the tuning parameters such as Feedback, Wet Dry Mix and Delay Time. Panel can be launched by double clicking the audio object in signal flow designer. This panel can be configured in custom panel, using “Launch Native Panel” and “Mount Native Panel” options.
The object mode of Delay based Effector will be shown in panel. The tuning parameters can vary based on selected object mode. User can configure following parameters in the panel if object mode is Echo or Flanger,
| Parameter | Unit | Range | Default Value | Note |
| Feedback | – | 0 to 0.9 | 0 | Feedback gain applied to delay line |
| Wet Dry Mix | – | 0 to 1 | 0 | Determines the ratio of wet signal added to dry signal |
| Delay Time | ms | 0 to Max Delay | 0 | Specifies delay times applied to audio signal |
User can configure following parameters in the panel if object mode is Chorus,
| Parameter | Unit | Range | Default Value | Note |
| Feedback | – | 0 to 0.9 | 0 | Feedback gain applied to delay line |
| Wet Dry Mix | – | 0 to 1 | 0 | Determines the ratio of wet signal added to dry signal |
| Delay Time 1 | ms | 0 to Max Delay | 0 | Specifies delay times applied to audio signal |
| Delay Time 2 | ms | 0 to Max Delay | 0 | Specifies delay times applied to audio signal, available only in Chorus mode. |
Value of dynamic additional parameter “Max Delay” is the maximum value of Delay Time 1 and Delay Time 2