Logic 7

The Logic7 algorithm creates a 7.1 surround upmix from a stereo (or dual mono) audio signal. This object upmixes two-channel stereo (or dual mono) audio inputs to seven main outputs (L/R Front, Center, L/R Side, L/R Rear).
The algorithm consists of a steering angle calculator from the input signal. A matrix mixer generates the surround channels by mixing input Left and Right channels weighted by adaptive gains calculated from the steering angle. All pass filters adjust the phases between Left & Right pairs of generated surround channels and Shelving filters are applied.

Diagram Description automatically generated

Logic 7 Properties

Below table describes about the Logic7 audio object properties and functionality.

Properties Description
Display Name Display the name of the Logic7 audio object in signal flow design. It can be changed based on the intended usage of the object.

The object has a 2 input channels and 8 output channels. The output channel order is:

  1. Left Front
  2. Right Front
  3. Center
  4. LFE
  5. Left Side
  6. Right Side
  7. Left Rear
  8. Right Rear

This object supports all framework configurable sample rates and block lengths.

Mode

There are no mode available for Logic 7 audio object.

Additional Parameters

There are no additional parameters available for Logic 7 audio object.

Tuning Parameters

Parameter Description Unit Min Max Default
Matrix Type Determines the amount of center channel blending across the left and right front channels and the degree of spatial separation between the side and rear channels.

  • MATRIX_OFF 0
  • MATRIX_CAR 1
None 0 1 1
Steering XOver Frequency Determines cross over frequency of the low pass filter that is used to extract the low pass signals Hz 10 500 200
Side Left / Right Steering Limit Determines the amount of front left and right signals mixed into the side channels deg -45 45 25
Side Center / Surround Stereo Limit Determines the amount of center channel signal that is mixed into the side channels deg -45 45 20
Side Center / Surround Mono Limit Determines the amount of monaural source signals that are mixed into the side channels deg -45 45 20
Rear Center / Surround Mono Limit Determines the amount of monaural source signals that are mixed into the rear channels deg -45 45 20
Rear Left / Right Steering Limit Determines the amount of front left and right signals mixed into the rear channels deg -45 45 25
Rear Center / Surround Stereo Limit Determines the amount of center channel signal that is mixed into the rear channels. deg -45 45 20
Side Shelf Type Refers to a high frequency shelving filter that is applied to signals steered to the side channels only

  • SHELF_OFF 0
  • SHELF_NEUTRAL 1
  • SHELF_READ 2
None 0 2 0
Rear Shelf Type Refers to a high frequency shelving filter that is applied to signals steered to the rear channels only

  • SHELF_OFF 0
  • SHELF_NEUTRAL 1
  • SHELF_READ 2
None 0 2 0

Tuning Panel

D:AudioworXGenFolderLogic7CustomPanelSS.jpg

Control Parameters

There are no control parameters available for Logic 7 audio object.

Native Panel

Logic 7 audio object does not support native panel.

_________________

Rate this post!