6.1 GTT Dynamic Signal Flow
The current release will support creating a signal flow from the GTT for multiple instances on the VirtualAmp, and the
Summit amplifier. See the documentation in the section seven of the UserGuideGTT.pdf for more details on this
process. Below is the high-level view of the creation process.
6.1.1 Process
1. Create a single instance signal flow in the GTT.
2. Send this signal flow to the target through the xTP.
3. Reboot the target (power off and on, reboot the device in IVP).
4. The target will detect the updated signal flow and boot up using its configuration. If no signal flow data is
available, the target will fall back to using INI files.
Page 8 of 17
xAF_Startup_Guide.docx Confidential / © by HARMAN CoC Lifestyle Audio
6.1.2 Limitations
This implementation has the same limitations as the .ini implementation. Audio routing must be configured
externally on the platform to support the supplied instance and core configuration.