These parameters are individual for each generator.
- On/Off button. Disabled order generator cannot be enabled through control interface.
- After select Order all section will be highlighted
- Signal type. Output signal type: sine, triangle, saw-tooth, rectangular or custom.
- Modulation type: AM, FM or none.
- Gain. Final gain is the sum of tuning and control gains. Tuning gain changes are not smoothed.
- Phase. Initial order’s phase is preserved. In other words, generated order’s phase in time t0 do not depend on changes of signal frequency, modulation frequency or modulation depth made before t0.
- Duty factor. Duty cycle for rectangular wave.
- Custom wave. Id of custom wave used for custom signal generation when Signal Type is Custom.
- Edit custom wave. Fast skip to the editor of wave.
- Signal frequency source. Order’s signal frequency can be:
- taken from signal frequency control input directly
- evaluated with linear equation from signal frequency control input
- Source of modulation frequency. Order’s modulation frequency can be:
- taken from modulation frequency control input directly
- evaluated with linear equation from modulation frequency control input
- evaluated with linear equation from signal frequency control input
- Source of modulation depth. Order’s modulation depth can be:
- taken from modulation depth control input directly
- evaluated with linear equation from modulation depth control input
- evaluated with linear equation from signal frequency control input